EMRO Products LTD. 1082 Portway Dr. Cincinnati, Ohio 45255 Phone/Fax: 513.474.4471 Email: Info@EMROProducts.com
(Applicable 150-Strength and 300-Strength)
SOLD BY:
EMRO Products Ltd. 1082 Portway Drive Cincinnati, Ohio 45255
MANUFACTURED FOR:
EMERGENCY PHONE:
SECTION I - PRODUCT IDENTIFICATION:
Product Name: EMRO 150 Ingredients: Proprietary blend of Industrial Odor Control compounds. Molecular Weight: N/A Formula: N/A
PRODUCT CONTAINS NO HAZARDOUS INGREDIENTS PER CFR 1910.1200 (Contains medium molecular wt. Synthetic Haloamide)
SECTION II - PHYSICAL DATA
Boiling Point: 212ºF SP. Gravity: 1.005 @ 60ºF Melting Point: N/A % Volatiles: None Appearance: Clear, colorless liquid PH: 8 to 10 Solubility: 100%
SECTION III - FIRE HAZARD
Extinguishing Media: Non-flammable Special Fire Fighting Procedures: Wear full protective equipment
SECTION IV - REACTIVITY DATA
Instability: Stable at ambient conditions. Hazardous Polymerization: Not expected at ambient conditions. Hazardous Decomposition: None Conditions to Avoid: Strong Acids, Ammonia compounds.
Stability with other products must be tested on individual basis.
SECTION V - SPILL, LEAK AND DISPOSAL PROCEDURES
Spill: Spray area with plenty of water. Wash clothing after handling or using product. Disposal: Collect and dispose of all the waste in accordance with applicable local, state and federal laws.
SECTION VI - SPECIAL PROTECTIVE EQUIPMENT
Use in adequately ventilated area. Additional protection may be advisable depending upon conditions of use.
SECTION VII - HEALTH HAZARD DATA
Acute Effects: May be harmful if swallowed. Avoid contact with eyes and skin. In some cases liquid may be irritating to eyes, mucous membranes or upper respiratory tract.
First Aid: If in eyes, flush with plenty of water for at least 15 minutes (remove contact lenses). If inhaled and breathing is difficult, give oxygen. If ingested, give several glasses of water. Call a physician.
SECTION VIII - SPECIAL PRECAUTIONS
Use in well ventilated areas. Do not take internally. Do not expose container to direct sun light or heat. Do not reuse containers. Clean up spills as they occur. Do not mix with any foreign materials until fully tested for compatibility.
DISCLAIMER
All EMRO PRODUCTS LTD. statements, technical information and recommendations contained herein are based on data which is believed to be reliable. The accuracy and completeness of such data are not warranted or guaranteed. We cannot anticipate all conditions under which this information and our said products, or the other products of other manufacturers or combination with our products may be used.
EMRO PRODUCTS LTD. assume no liability or responsibility for loss or damage resulting from the improper use or handling of our products, from incompatible product combinations, or from the failure to follow instructions, warnings and advisories in the product label and MATERIAL SAFETY DATA SHEET.
